<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: System Administration—User Accounts
To open system administration, select Setup | System Administration from main menu. Click on the tabs to change the different settings.
System Administration Bar
You can define the following aspects of your PRTG system setup:
- System Administration—User Interface
- System Administration—Monitoring
- System Administration—Notification Delivery
- System Administration—Core & Probes
- System Administration—Cluster
- System Administration—User Accounts
- System Administration—User Groups
- System Administration—Administrative Tools
PRTG administrator users can change all users' account settings and add new users.
Note: If you open this system administration page from another administration page and 15 minutes (900 seconds) have passed since your last credential based login, you have to provide your credentials again for security reasons. A dialog box will appear. Enter your Login Name and Password for PRTG in the corresponding fields and click on the Login button. You can continue with your task immediately.
- To change a user's settings, select it from the list by clicking on the user name. The available setting options are the same as shown in the My Account settings of the currently logged in user (plus some account control options).
- To add a new user, click on the New User button. The options are the same as for existing users (with slight differences).
- To batch-add several users at once in a simple way, please click the Multiple New Users button. In the dialog box appearing, select an existing user group from the drop down menu and enter or paste a list of email addresses. They can be separated by space, comma, semicolon, or a new line. Click the Add button to confirm. For each address, PRTG will create a new local user account within the selected user group, carrying the email address as value for Login Name, Username, and Email Address. A new password will be generated automatically and sent to the email address.
- To add a new user group, click on the New User Group button. The options are the same as for existing groups (with slight differences).
- Access rights in PRTG are given via user groups. Please make sure a user account is member of the correct user group and give access to this group in your device tree object's settings.
Note: Predefined objects cannot be deleted!
Note: This documentation refers to the PRTG System Administrator user accessing the Ajax interface on a master node. For other user accounts, interfaces, or nodes, not all of the options might be available as described. When using a cluster installation, failover nodes are read-only by default.
User Account |
|
---|---|
Login Name |
Enter the login name for the user. |
Display Name |
Enter a name for the user for display purposes. This will not be used for login. |
Email Address |
Enter the user's email address. |
Timezone |
Enter the time zone for the current user. |
Date Format |
Enter in what format dates will be displayed for the current user. Note: This setting will take effect after the next login. |
Password |
Define the user's password. For security reasons, the account settings page does not contain the password. Choose between:
If you choose to specify a new password, enter the old password, and the new password twice. Note: The new password must be at least 8 characters long; no character may occur more than 3 times. It must contain a number and a capital letter. |
Hash |
The hash (passhash) value can the used as password substitute when calling functions from PRTG's Application Programming Interface (API) that require an authentication. For more information please see Using the PRTG API (Application Programming Interface) section. |
Auto Refresh and Alerting |
|
---|---|
Auto Refresh Type |
Specify how PRTG's web pages will be refreshed for the current user. Choose between:
|
Auto Refresh Interval (Sec.) |
This setting is only relevant when auto refresh is enabled above. Enter the number of seconds that will be waited between two refreshes. We recommend using 30 seconds or more. Minimum value is 20 seconds. Note: Shorter intervals create more CPU load on the server running the PRTG core server. If you experience load problems while using the web interface (or PRTG maps), please set a higher interval. |
Play Audible Alarms |
Define when an audible alarm will be played for the current user on web pages whenever there are alarms in PRTG. Choose between:
For more information about audible notifications and supported browsers, please see More section below. |
Ticket System |
|
---|---|
Email Notifications |
Define if you want to get emails from the ticket system. Choose between:
|
Web Interface |
|
---|---|
Homepage URL |
Define the user's default page loaded after login and when clicking on the Home button in main menu. |
Max. Groups/Devices per Group |
In order to provide you with a speedy user experience PRTG tries to keep the page size for the page showing the device tree small by automatically folding groups and devices with many items. Define how many groups and devices are shown at maximum before the automatic reduction is performed. We recommend using a value between 10 and 30. |
Max. Sensors per Device |
In order to provide you with a speedy user experience PRTG tries to keep the page size for the page showing the device tree small by automatically folding groups and devices with many items. Define how many sensors are shown at maximum before the automatic reduction is performed. We recommend using a value between 10 and 30. |
Account Control |
|
---|---|
Account Type |
This setting is only shown for administrator users. However, it is not shown if the user you modify the account settings for is a member of a group with administrative rights. Define the account type for the current user. Choose between:
Note: This setting cannot be changed for the default administrator user. |
Allow Acknowledge Alarms |
This setting is only visible if read only user is enabled above. Acknowledging an alarm is an action which requires write access rights. However, you can explicitly allow this action to read-only users. If enabled, they still do not have write access, but may acknowledge alarms. Choose between:
|
Primary Group |
This setting is only shown for administrator users. Select the primary group for the current user. Every user has to be member of a primary group to make sure there is no user without group membership. Membership in other user groups is optional. For user experience, there is no difference between the primary and other user groups. |
Status |
This setting is only shown for administrator users. Define the status of the current user. Choose between:
Note: This setting cannot be changed for the default administrator user. |
Last Login |
Shows the time stamp of the user's last login. This setting is shown for your information only and cannot be changed here. |
User Groups |
|
---|---|
Member of |
Shows the groups the current user is member of. Access rights to the device tree are defined on group level. This setting is shown for your information only and cannot be changed here. |
In the Comments tab you can enter free text for each object. This can be used for documentation purposes or to leave information for other users.
In the History tab all changes in the settings of an object are logged with a timestamp, the PRTG user which conducted the change, and a message. The history log keeps the last 100 entries.
Click on the Continue button to store your settings. If you change tabs or use the main menu, all changes to the settings will be lost!
Knowledge Base: Which audible notifications are available in PRTG? Can I change the default sound?
There are some settings that you have to make in the PRTG Administration Tool, available as native Windows application. For more details, please see sections: |
---|
Keywords: Account Settings,Configure,Configure User Account